Huawei B593u-12.firmware






 have already provided the unlocking solution of the Huawei B593u 4G CPE router. In various countries, customized firmware B593 routers have been released and do not allow to unlock them. This article is dedicated to those persons who are facing problems in unlocking their B593u devices.


                       

ONLINE SERVICES🔛 JAZZ ZONG TELENOR STC VIVA ZAIN VODAFONE ALL OUT OF COUNTRY DEVICES CLOSE ROUTER WITHOUT OPEN UNLOCKING SERVICES ON BEST SERVICE 💯 JAZZ DIGIT MOBILE 1 ONLINE UNLOCKING SERVICES ON website www.master-unlocking.com Whatsapp +923431609719 https://wa.me/qr/THUJYEURPNIMG1


METHOD



Requirements of flashing the firmware of Huawei B593u 4G CPE router

    1. Download unlocked firmware of Huawei B593u-12

                                  

      2. Download Huawei B593u Firmware Upgrade Tool

                                

     3. Download Huawei B593 Configuration File to Create Profile

                              

How to Flash the Firmware of Huawei B593u 4G CPE Router Free?

1. Connect the B593u to the PC and assign the static IP address to the PC network port connected to the HUB to 192.168.1.5.

Assigning the IP address

2. Open the downloaded Huawei B593 multicast upgrade software. Click on refresh to refresh the network card list and select the network card whose IP address is 192.168.1.5.

Choosing Lan Port3. Click Open, and then a dialog box for selecting the upgrade file is displayed. Select the upgrade package cpe.tar.bz2, and then click Open.

Selecting the system upgrade file4. If you have an upgrade package as B593.trx, then in Policy, choose a router, click Open, and select the file.

Selecting the Router upgrade file5. Below the File Path box, if the version number is displayed as the error information such as Error file version… or Analyse time-out…, it indicates that the upgrade package is incorrect.

6. Click Start to start sending multicast packets.

7. After the successful upgrade is complete; all the five signal indicators will be ON on the router.

8. Now, Click Stop to stop sending multicast packets.

9. Close the multicast tool.

10. Power off the HUB and enjoy the B593 CPE router.

If your B593 4G CPE router does not allow the change or create the new APN, then

1. Open 192.168.254.254 and login as a user (password @l03e1t3).

2. Go to the System tab.

3. Find Upload Configuration File and choose file jhosherxx.conf from PC you have already downloaded.

4. After uploading message will popup, click ok and wait until the device reboots.

Now, you can easily create the profile in your B593 router.